ZG2 Portal

Cloud Management • EAP 110 & EAP 225
ZG2NDS-Cloud Omada v6.2.14.11 • Active
Cloud Controller
Connected
Omada SDN v6.2 • Port 8043/8088
Target Access Points
0 Discovered
EAP 110 & EAP 225 Hardware Support
Provisioned SSIDs
3 Presets
Piso WiFi, Enterprise, Cafe Guest
Public L3 Inform IP
15.235.247.115
Port 29810 (UDP) / 29811 (TCP)

Server Host Performance & Resources Live Telemetry

Real-time compute, memory, and disk capacity of the Omada VPS Controller host.

Uptime: Calculating...
Server CPU Usage
0.0%
2 Cores • Load: 0.00, 0.00, 0.00
Server RAM Usage
0.0%
0 GB / 0 GB (0 GB Free)
Server Storage (Disk)
0.0%
0 GB / 0 GB (0 GB Free)

Supported Access Point Hardware

Tailored RF parameters, antenna profiles, and channel allocation for your deployed fleet.

Single-Band 2.4 GHz N300

TP-Link EAP 110 / Outdoor

Cost-effective, high-penetration 2.4GHz workhorse. Ideal for Piso WiFi, outdoor plazas, long-range rural internet, and community hotspots.

Frequency Band 2.4 GHz (802.11b/g/n)
Max Speed 300 Mbps
Optimal Channels 1, 6, 11 (20 MHz)
Common Deployments PisoNet, Hotspot Vouchers
Dual-Band AC1350 / AC1200 Wave 2

TP-Link EAP 225 / Outdoor

Gigabit MU-MIMO dual-band with seamless roaming. Handles high client density in commercial buildings, hotels, corporate offices, and outdoor events.

Frequency Bands 2.4 GHz + 5 GHz Wave 2
Max Speed 867 Mbps (5G) + 450 Mbps (2.4G)
Advanced RF Band Steering, Airtime Fairness
Fast Roaming 802.11k / 802.11v Seamless

Access Point Inventory & Discovery

Manage adopted hardware, view live telemetry, and adopt newly discovered devices.

Device Name & Model MAC Address IP Address Status Radios & Channels Firmware Clients Actions

Access Point Fast Provisioning Wizard

Roll out unified wireless configurations across your EAP 110 and EAP 225 hardware in 3 simple steps.

1

Select Target Hardware & Scope

Choose the target access point model or apply across your entire fleet.

2

Configure Wireless SSID & Security

Specify network name, security standard, and network segmentation.

3

RF Tuning & Channel Optimization

Customize channel width and transmission power for optimal coverage.

Provisioning Profile Library

One-click standard network templates configured for Philippine hotspot operators, commercial hubs, and enterprises.

Field Technician & Remote Deployment Guide

Deploy EAP 110 and EAP 225 access points anywhere across the world (branch offices, client venues, outdoor towers) and link them seamlessly to this Omada Controller.

Public Controller IP: 15.235.247.115
Inform URL: http://15.235.247.115:29810/inform
Discovery UDP Port: 29810
Method 1

EAP Standalone Web GUI

Connect a laptop directly to the EAP Ethernet or default Wi-Fi (e.g. TP-Link_2.4GHz_XXXXXX):

  1. Open browser and go to http://192.168.0.254 (or the IP assigned by local DHCP).
  2. Log in with default username admin and password admin.
  3. Navigate to Management > Controller Settings.
  4. Set Inform URL or Controller IP to:
    15.235.247.115
  5. Click Save. The AP will immediately appear under the Access Points tab waiting for adoption!
Method 2

Direct SSH Terminal

If you have console or SSH access to the access point:

Terminal Command
ssh admin@<AP-IP-ADDRESS>
# Enter password (default: admin)
# In the CLI prompt:
set-inform http://15.235.247.115:29810/inform
Method 3

MikroTik / pfSense DHCP Option 138

Automatically inform all APs on the local network using DHCP Option 138 (Capwap Controller IP):

MikroTik RouterOS Terminal
/ip dhcp-server option
add code=138 name=omada-controller value="'15.235.247.115'"

/ip dhcp-server network
set [find] dhcp-option=omada-controller
Method 4

TP-Link Omada Discovery Utility

Download the free Omada Discovery Utility tool from TP-Link support:

  1. Run the utility on any PC connected to the same switch or VLAN as the APs.
  2. The utility automatically lists all unadopted EAP 110 & EAP 225 units.
  3. Select the APs, click Batch Setting.
  4. Enter Controller Host/IP: 15.235.247.115.
  5. Enter AP credentials (default: admin/admin) and click Apply.